26
R
EMOTE CONTROL*
Menu Access
and Control
Zoom Function
Control
Motion Alarm
ON & OFF
ID Buttons
To use the remote controller, set the CAMERA ID in the camera’s OSD menu. The default setting is
001
.
If the CAMERA ID is modified, user must restart the camera; then the camera will be able to recognize
the new ID.
Input the ID number of your camera to the remote controller. After you input the ID number, LED light
will turn on, and your remote controller will be ready to be used.
Press KEY + ID Button to access the camera. = Camera ID 001.
Press ENTER button to access the Menu.
The KEY button will turn the camera into the standby image. The LED will flicker for 20 seconds.
ZOOM IN / ZOOM OUT Buttons:
These are used to control the lens zoom and to select the
zooming area of the alarm feature.
Select the area you wish to zoom into during motion, and
then select the zoom range, using the WIDE button.
Select TELE button to save the zoom range setting.
If the zoom range during motion is smaller than the zoom
range during standby, alarm zoom range will not be saved.
To turn on the Alarm feature, select ON/OFF button.
When the button is selected, the camera will zoom from
tele to wide once before the feature turns on. To turn OFF
the Alarm feature, select ON/OFF button again.