1
Detach the dome cover by torx wrench provided from
bottom case before installation the camera.
Reset to the Factory Defaults
Press the reset bu
tton fo
r 5 seconds to return the setup
to the Factory Default.
Warning:
If you press the ‘Reset’ button, you will lose all setting data.
If needed, please, make a note for further installation.
Match the one screw hole on the dome cover and camera
bottom specially.
Disassemble the camera
Installation -
Before installing your camera, you have to read the following cautions.
1. Make sure the mounting surface can withstand three times the weight of the
camera.
2. Do not let the cables get caught in improper places or the electric line cover be
damaged. This can cause a short or fire.
3. For the installation process, remove the dome cover from the camera module.
Reset Button
7