9
1
Power
2
Network
3
Audio Output
4
Audio Input
5
Alarm
Output
6
Alarm
Input
5
~
6
Alarm In/Out
DI (+)
WHITE
DI (-)
YELLOW
DO (-)
SKY BLUE
DO (+)
GRAY +
DOT
Installation -
Cabling
1
Power Connection
Please, check the voltage and current capacity
of the rated power carefully.
2
Network Connection
Connect the crossover cable into the RJ-45.
3
Audio Output
Connect the ‘audio out’ port of the camera to the
‘line in’ port of the speaker.
If the speaker without the amplifier is connected
to the audio out port, it doesn’t work properly.
Therefore, the speaker with the amplifier or the
separate amplifier is needed.
Audio Out is available via the RTSP backchannel.
4
Audio Input
Connect the ‘audio in’ port of the camera to the
microphone directly or to the 'line out’ port of the
amplifier connected with a microphone.
If the microphone is connected directly, the
microphone with the embedded amplifier such
as the condenser mic. needs to be used.
5
Relay/Alarm Output
Connects to the alarm lights, siren, or lamps and
the sensor types are normally open and
normally close.
6
Sensor/Alarm Input
The sensor/alarm input device's cable should
connect to the yellow and white cables of the
alarm cables.
Rate Power
Power
Consumption
PoE
DC 12V
8.9W
IEEE 802.3af
class3