Digital Watchdog MEGApix FLEX DWC-PVX16W User Manual Download Page 62

Page: 62 / 86

Setup - Record Setup

Storage Configuration

Storage Size -

Total capacity of SD card and the remainder of it are displayed.

Auto Delete -

Select the period for Auto delete. The image data stored before period will be deleted automatically.

Delete all stored image older than selected time.

Overwrite -

If it is set ON and remained space of SD card reach to less than 8MB, new data will start to be overwritten on the

oldest data. However, if it is set OFF and remained space of SD card reach to less than 8MB, image recording will be stopped.

Unmount -

remove the SD card from the device.

Format -

Delete the all contents that stored in SD card.

Click ‘Apply’ to make above setting eﬀective.

Click 'Cancel' to return to the previous setting.

Summary of Contents for MEGApix FLEX DWC-PVX16W























































































Search results

Summary of Contents for MEGApix FLEX DWC-PVX16W

Reviews:

Related manuals for MEGApix FLEX DWC-PVX16W

Brands by name

Popular brands

Digital Watchdog MEGApix FLEX DWC-PVX16W, User Manual

Search results

Summary of Contents for MEGApix FLEX DWC-PVX16W

Reviews:

Related manuals for MEGApix FLEX DWC-PVX16W

Brands by name

Popular brands