Digital Watchdog MEGApix DWC-MB45WiAT User Manual Download Page 67

67

Setup - System  set

up

Users management 

1

 

Users - 

List all the user accounts for authentication.

2

 

Add -

 Register a new user.

 The ID and password are limited to 8 characters with at least two combinations of uppercase letters, lowercase letters, 

numbers and special characters. Acceptable special characters are : ~ ' ! $ ^ ( ) _ - { } [ ] ; . ? /

Click

 

‘Apply’

 

to

 

make

 

above

 

setting

 

effective.

 Click 'Cancel' to return to the previous menu.

3

  

Modify - 

Modify the information of the user accounts registered. For 

the A

dmin account, only 

the p

assword can be modified.

4

 

Delete -

 Delete the selected user account. Admin account cannot be deleted.

ID

Password

Retype password

Pas

s

word hint

User

authority

Enter a new user ID except Admin.
Enter the user password. (Check the Password)

Enter the user 

p

assword again for verification.

Enter the password hint.
Select operator or viewer for the user's permission level. 
Viewer: Allowed to view live video only.
Operator: Allwed access to most of the camera's functions, 
live and playback video. 

1

3

2

4

Summary of Contents for MEGApix DWC-MB45WiAT





















































































Reviews: