Digital Watchdog iV3377WD, User Manual, Page: 7 / 60

USER’S MANUAL
iV3377WD / iV3377WTIR 7 / 60
INSTALLATION
D
A
F
B
E
C
1. Use the supplied L-wrench to remove the four
fixing screws (B) of dome cover (A).
2. Align the camera unit with the surface of the
ceiling; make marks on the ceiling in the places
where the screw holes are to be drilled; and
then drill the four holes.
3. Cut a hole (diameter 2.9in/0.73mm) in the
ceiling for routing the cables.
4. Pass the power cable (E) and LEN cable (F)
from the camera unit through the cable hole in
the ceiling.
5. Align the four screw holes in the camera unit
(D) with the screw holes in the ceiling, and then
secure the camera in place by tightening the
four or more screws (C) through the washers.
6. Carry out the settings and adjustments for the
camera.
7. Secure the dome cover (A) by tightening the
screws (B).