25
24
EXPOSURE
BRIGHTNESS
0 ~ 99
SHUTTER
1/60, 1/100FLC, 1/120~1/100000
BLC
OFF / ON
BLC (Back Light Compensation)
AGC
HIGH / MIDDLE / LOW / OFF
AGC(Auto Gain Control)
MAX_DR
OFF / ON (0~20) (Electronic Wide Dynamic Range)
STARLIGHT
AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.)
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
COLOR
WB MODE
AWC / ATW / MANUAL / PUSHLOCK (AWC is recommended.)
R-Y GAIN
0 ~ 255
B-Y GAIN
0 ~ 255
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
DAY & NIGHT
Day & Night Mode
AUTO : READ TIME(3~63) / S-LEVEL(0~100) / E-LEVEL(0~100)
COLOR---->BW
: Switching from COLOR to BW; If the number is higher, the camera will only
switch during a super low light condition
BW ---->COLOR
: Switching from BW to COLOR; This number should be always lower than
COLOR to BW
Read Time
: time interval to switch from COLOR to BW
COLOR
BW : BURST (OFF / ON); When the BURST is OFF, the picture will have less noise.
C-SUP
Color Suppression :
Color will be reduced at low illumination, if the C_SUP Level is higher /
0 ~ 100. (Not available when 3D-DNR is ON.)
A-SUP
Aperture Suppression :
Edge sharpness will be reduced at low illumination, if A_SUP Level
is higher / 0 ~ 100. (Not available when 3D-DNR is ON.)
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
O
SD MENU*
-
V1382TIR, V1382TIRH
FUNCTION
MIRROR
OFF/MIRROR/V-FLIP/ROTATE
SHARPNESS
0 ~ 49
GAMMA
0.05 ~ 1.00 / USER
FREEZE
OFF / ON
NEGATIVE
OFF / ON
3D-DNR
OFF / LOW / MIDDLE / HIGH
3D DNR (3D Digital Noise Reduction)
D-ZOOM
OFF / ON(x1.0 ~ x3.0 Digital PTZ)
SLC
OFF / ON
SLC (Side Light Compensation)
HME
OFF / ON
HME (Highlight Masking Exposure)
DIS
OFF /ON
DIS (Digital Image Stabilizer)
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
MOTION (OMNI-Plus Camera Only)
MOTION
OFF / ON
SET WINDOW
ALL SET (Set the Entire Screen)
ALL CLEAR (Clear the Entire Screen)
SENSITIVITY (1 ~ 120)
SHOW INDICATOR (OFF / ICON / TRACE)
DELAY OUT (1 ~ 15)
Motion Alarm Zoom-In Delay
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
