26
DEFECT (CONT.)
- WHITE DPC
- POS / SIZE: Set the DPC Zone. Use the joystick’ controller on the camera’s board to
adjust the zone’s position. Press the enter key and use the joystick controller to adjust
the zone’s size.
- START: Press START to begin the DPC test. The screen will get bright and
compensate for the black defect.
- DPC VIEW: Show the Defect pixels which have been compensated.
- LEVEL: Set the range of DPC application.
- AGC: Set the value level for AGC while DPC is on.
- SENS-UP: Sent the value level of Sens-Up while DPC is on.
RS485
- CAM ID: Set the camera’s ID from 0~255.
- ID DISPLAY: Select to show or hide the camera ID on the screen.
- BAUDRATE: Set the camera’s baudrate. Select from:
2400/4800/9600/19200/38400. Default is 9600.
SPECIAL (CONT.)
