Quick Start Guide
Rev Date: 08/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
Junction box
Camera module
Camera dome cover
1
Using the mounting template or the junction box itself, mark and drill the necessary holes on the mounting surface.
2
Secure the junction box to the mounting surface using the screws and anchors included.
3
To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included
with the camera.
NOTE:
Do not touch the lens when handling the camera.
4
Pass wires through and make all necessary connections.
5
Secure the camera to the mounting bracket using the included screws. Align the camera’s mounting holes with the ones
in the junction box.
6
Adjust the camera’s lens position and angle, then place the cover dome over the camera lens and affix the cover to the
bracket with the original dome housing’s screws.
