manualshive.com logo in svg

Digital Watchdog DWC-V6763TIR, Manual

Share
Download
Digital Watchdog DWC-V6763TIR Manual Download Page 20

20

DRC 

DYNAMIC RANGE COMPRESSOR

 

DRC enables dark areas in images to become more visible without overexposing the 

 

bright areas to create one perfect image. Select from: OFF / ON / AUTO. If ON is 

 

selected, adjust the DRC value from 0 ~ 8. 

 

NOTE: If DEFOG is enabled, DRC settings are set automatically and will 

 

not be available for adjustment. 

DEFOG

  Allows the camera to process a scene that is obscured by fog or weather conditions and 

 

provides a visibly improved image.

 

- POS/SIZE:  Set the location and size of the defog  mask. Use the joystick controller 

 

on the camera’s board to adjust the De-Fog zone’s position. Press the enter key and use 

 

the joystick controller to adjust the zone’s size.

 

- GRADATION:  Sett the DEFOG level from 0 ~ 2. The higher the number, the stronger 

 

the Defog mask will be.  

 

- DEFAULT:  Return the Defog settings to their default values.

EXPOSURE (CONT.)

Summary of Contents for DWC-V6763TIR









































Reviews:

No comments

Brands by name

Popular brands

Load more brands