Digital Watchdog DWC-MPV85WiATW, User Manual, Page: 82 / 89

ƉƉĞŶĚŝdž
Port Ĩ orwarding
After entering the correct TCP/IP settings,
you are ready for ‘Port Forwarding’
(Cases A, B).
1
Please record the TCP/IP settings of your IP Camera for
future reference. You may need this information to access
LJŽƵƌ/WĂŵĞƌĂĂŶĚƚŽĐŽŶĮŐƵƌĞ͚WŽƌƚ&ŽƌǁĂƌĚŝŶŐ͛͘
2
After clicking ‘Apply’, the system will prompt for reboot.
Please allow the system 50 seconds to reboot and accept
ƚŚĞĐŚĂŶŐĞƐ͘ĨƚĞƌϱϬƐĞĐŽŶĚƐ͕ĐůŽƐĞƚŚĞĐŽŶĮŐƵƌĂƚŝŽŶ
screen.
The view will display ‘Trying to Reconnect’. If the ACTIVE
ůŝŐŚƚŽŶƚŚĞ/WĂŵĞƌĂŚĂƐŐŽŶĞŽīĂŶĚŝƐŶŽǁďĂĐŬŽŶ
ĂŐĂŝŶŇĂƐŚŝŶŐ͕ƚŚĞ/WĂŵĞƌĂŚĂƐƌĞƚĞĚ͘ĨƚĞƌƚŚĞ
system reboots completely, remove the power supply from
the unit and close Internet Explorer.
3
Return your PC/Laptop TCP/IP properties to their original
settings.
4
Before installing the IP Camera, you must use
‘Port Forwarding’ on your personal router (Cases A, B).
You will need to forward 1 ports:
· Web Port
All the ports will be forwarded to the IP address you
assigned to the IP Camera.
In the example above, you would forward:
· 8888 > 192.168.0.200
i For information on how to use ‘Port Forwarding’,
please read Appendix C.
IP Address
Subnet Mask
Default Gateway
Preferred DNS Server
DDNS Server
Web Port
IP Camera TCP/IP Settings
ϴϮ