Note: Please see the full product manual for web viewer setup, functions and camera
settings options.
5.
To view the camera’s web viewer, click on ‘View Camera Website’.
6.
To save the changes made to the camera’s settings, input the ID and PW of the camera for
authentication and click ‘Save’.
7.
If the camera needs to be rebooted after the settings were changed, press the ‘Reboot’
button. The camera will cycle power and will appear back in the search results once the
reboot is complete.
8.
To update the camera’s firmware from the DW IP Finder
™
, click on the firmware tab, upload
the firmware file and select the cameras to update. You can update multiple cameras at the
same time.
4.
The camera’s default network information is:
Step 4 – DW IP FINDER
™
Use the DW IP Finder
™
included in the camera’s accessory CD to scan the network and detect all
MEGApix
®
cameras, set the camera’s network settings, perform firmware upgrade or access the
camera’s web client.
Rev Date: 04/16
Copyright © Digital Watchdog. All rights reserved. Specifications
and pricing are subject to change without notice.
Step 5 – WEB VIEWER
Once the camera’s network settings have been setup properly, you can access the camera’s web
viewer using the DW IP Finder
™
. To open the camera’s web viewer:
1.
Find the camera using the DW IP Finder
™
.
2.
Double-click on the camera’s view in the results table.
3.
Press the ‘View Camera Website’. The camera’s web viewer will open up in your default
web browser.
4.
Enter the camera’s username and password (default are admin / admin).
5.
If you are accessing the camera for the first time, install the ActiveX files in order to view
video from the camera.
Network Setup
1.
Run the CD included with the camera and click on the DW IP Finder
™
file.
2.
The software will scan your network for all supported cameras and display the results in the
table. Allow up to 5 seconds for the IP Finder to find the camera on the network.
3.
Select a camera from the list by double-clicking on the camera’s image or clicking on the
‘Click’ button under the IP Conf. column. The camera’s network information will appear. If
necessary, you can adjust the camera’s network type.
Select DHCP if the internet service is dynamic IP. This will allow the camera to receive its IP
address from the DHCP server.
Select STATIC to manually enter the camera’s IP address, subnet mask, Gateway and DNS
information.
Contact your network administrator for more information.
Default TCP/IP information
• IP: 169.254.x.y
*
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.1
• DNS: 168.126.63.1
*
When the camera is connected to
a non-DHCP server.
Quick Start Guide
DWC-‐MF10M28T
DWC-‐MF21M4TIR
DWC-‐MF10M28T
DWC-‐MF21M4TIR
Firmware Upgrade
Open Camera's IP
Configuration Screen
Camera Uptime
Camera Name,
Model, IP Address,
and MAC Address
Camera's Firmware
Search for
Cameras
View Camera's
Thumbnail View
Camera's Network Settings
Filter Search
Results
Default ID / PW : admin / admin
‘Port Forwarding’ has to be set in your network’s router for external access to the camera.