Quick Start Guide
DWC-MBH2i4WV
Username:
admin
Password:
admin
ATTENTION: This document is intended to serve as a quick reference page for initial set-up. It is recommended
that the user read the entire instruction manual for complete and proper camera usage.
Tel: 866-446-3595 / 813-888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
Quick Start Guide
Step 1 – PREPARING TO MOUNT THE CAMERA
Step 2 – CABLING THE CAMERA TO EXTERNAL DEVICES
1.
The mounting surface must bear five times the weight of your camera.
2.
Do not let the cables get caught in improper places or the electric line cover to be damaged.
This may cause a breakdown or fire.
3.
Using the mounting template sheet or the camera itself, mark and drill the necessary holes in
the wall or ceiling.
5.
Pass the wires through the mount bracket and make all necessary connections.
a.
NETWORK CONNECTIONS – If you are using a PoE Switch, connect the camera using
an Ethernet cable for both data and power.
b.
NETWORK CONNECTIONS – If you are using a non-PoE switch, connect the camera
to the switch using an Ethernet cable for data transmission and use a power adapter to
power the camera.
Power Requirements
Power Consumption
DC 12V
PoE IEEE 802. / PoE Class 2
LED Off: 5W, 416mA
LED On: 7W, 583mA
Resetting the camera:
Press RESET about 10 seconds when the camera is powering on
or rebooting to restore the default settings, including the user name, password, IP address,
port No., etc.
WHAT’S IN THE BOX
QSG Manual
1 Set
Screw & Plastic
Anchor – 3pcs
1 Set
Manual CD
1 Set
L-Wrench
1 Set
Template Sheet
for installing by
Bolt & Nut
1 Set
WPS / Reset
Adjust Nut
0°~90°
0°~360°
0°~360°
7
Step 3 – INSTALLING THE CAMERA
6.
Using the included three (3) screws, mount and secure the camera to the wall or ceiling.
7.
Use the camera’s bracket to adjust the camera’s view. To adjust the camera's view:
a.
Loosen the adjustable nut.
b.
Adjust the pan direction [0°~360°].
c.
Adjust the tilt direction [0°~90°].
d.
Rotate the camera [0~360°] to adjust the lens to the surveillance angle.
e.
Tighten the adjustable nut to complete the installation.