Digital Watchdog DW-BJS1U12T-LX Quick Start Manual Download Page 1

State of the art hyper-optimized video management platform designed for ease, speed and efficiency.

Blackjack

 S-RACK — Up to 16 2.1MP Cameras (1080p True HD Resolution)

NOTE:

  Download All Your Support Materials and Tools in One Place

1. Go 

to: 

http://www.digital-watchdog.com/support-download/

2.  Search your product by entering the part number in the ‘

Search by Product

’ search bar.  Results for applicable part numbers will 

populate automatically based on the part number you enter.

3. Click 

Search

’. All supported materials, including manuals, Quick Start Guides (QSG), software and firmware will appear in the results.

Quick Start Guide

ATTENTION

  

This document is intended to serve as a quick reference for initial set-up. See the DW Spectrum

 IPVMS full manual for 

more information on features and functionality.

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

NOTE:

 Monitor and network cables are not included.

DW-BJS1U3T-LX

DW-BJS1U6T-LX

DW-BJS1U9T-LX

DW-BJS1U12T-LX

DW-BJS1U18T-LX

DW-BJS1U24T-LX

Blackjack S-RACK

WHAT’S IN THE BOX

S-RACK Server

1 Set

Quick Start Guide

1 Set

OS Recovery USB 
(Emergency 
Recovery)

1 Set

Keyboard and 
Mouse

1 Set

Power Cable (x2)

1 Set

Patch Cable

1 Set

Summary of Contents for DW-BJS1U12T-LX

















Reviews: