Digital Watchdog DW-709 Operating Instructions Manual Download Page 102 | Manualshive

Page: 102 / 105

background image

102

102

KALTECH DW716 Manual

KALTECH DW716 Manual

8(9

8(9

Check if the power cable is connected correctly.
Check if the input voltage is correct.
If the system power does not turn on when the power cable is connected correctly, please contact the service center.

1

The system power does not turn on.

Check if the monitor power cable is connected properly
Check to make sure the monitor is turned on.
Check if the video output cable of DW716 DVR is properly connected to the monitor.
Unplug the power cable and plug in again..

2

The system power is turned on, but no video data is displayed on the monitor.

3

The camera numbers are displayed on the screen, but camera images are not displayed.

4

The camera video is shown on the screen, but the system doesn’t record video.

Check if there is a recorded video data at the time that you are trying to search on the table.
If there is no recorded video data, check to make sure the recording mode in the recording setting mode is not set to

“NONE”.

5

It is impossible to search through the recorded video.

Check if the camera video output is connected to DW716 DVR system correctly.
Check if the power cable on the camera is connected correctly.
Check if the video cable connecting the camera to DW716 DVR system has a problem.
This problem can occur because of weak video signal if the video data is transferred by the video data distributor when

the video is connected to multiple systems. Connect the camera directly to DW716 DVR.

Turn off DW716 system and turn it on again.

Check to make sure the recording mode in the recording setting mode is not set to “NONE”.
Turn off the DW716 DVR and turn it on again.

6

Audio data recorded with video data is not playing.

Check if the audio recording option is correctly set to the camera you wish to record audio.
Check if the audio play option in the Searching mode is selected.
Check if the microphone and speaker port on the rear of DW716 system are connected correctly.
Check if the connected microphone is working properly.
Check if the connected speaker is working properly.

FA

Q

FA

Q

«
...
100
101
102
103
104
...
»

Summary of Contents for DW-709










































































































Reviews:

No comments

Related manuals for DW-709

WJND400 - NETWORK DISK RECORDER

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Codex Pages: 12

Brand: Q-See Pages: 13

Brand: Vantech Pages: 80

Brand: DANE-ELEC Pages: 34

Brand: Infinite Play Pages: 8

Brand: AVYCON Pages: 135

Brand: Samsung Pages: 1

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands