O
SD MENU*
-D2382TIR
EXPOSURE
LENS
DC (0~100) / MANUAL / VIDEO. (DC Lens is recommended.)
SHUTTER
1/160 /1/100 / FLC / 1/250 ~ 10000 / SENS-UP x2 ~ x250
BLC
OFF / ON , BLC (Back Light Compensation)
AGC
HIGH / MIDDLE / LOW / OFF
AGC (Auto GainControl)
MAX-DR
OFF /ON (0~ 20) (Electronic WideDynamic Range)
STARIGHT
AUTO (x2 ~ x250) / OFF (x32 is recommended.)
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
COLOR
WB MODE
AWC / ATW / MANUAL / PUSH LOCK
R-Y GAIN
0 ~ 100
B-Y GAIN
0 ~ 100
DAY & NIGHT
Day & Night Mode
AUTO/ COLOR/ BW / EX-CONT
COLOR---->BW : Switching fromcolor to BW; if the number is higher, the camera will only switch during a
super low light condition.
BW ---->COLOR : Switching from BW to color; this number should always be lower than COLOR to BW
Read Time: Timeinterval to switch from Color to Black-and-White
COLOR
B&W: (BURST:OFF/ON) Whenthe burst is OFF will make less noise
C-SUP
Color Suppression :Color will be reduced at low illumination, if the C-SUP Level is higher. 0 ~ 100 (Not Available
when DNR is On.)
A-SUP
ApertureSuppression: The sharpness of the edges will be reduced at low illumination, if A-SUP Level is higher. 0 ~ 100
(Not Available when DNR is On.)
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
FUNCTION
MIRROR
OFF/MIRROR/V-FLIP/ROTATE
SHARPNESS
0 ~ 31
GAMMA
0.05 ~ 1.00 / USER
FREEZE
OFF / ON
NEGATIVE
OFF/ ON
3D-DNR
OFF / LOW / MIDDLE / HIGH, 3D-DNR (3D Digital Noise Reduction)
D-ZOOM
OFF / ON (x1.0 ~ x32 PTZ)
SLC
OFF / ON SLC (Side Light Compensation)
HME
OFF / ON HME (Highlight Masking Exposure)
DIS
OFF / ON
DIS (Digital Image Stabilizer)
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
MOTION (Omni-Focus Lens Only)
MOTION
OFF / ON
SET WINDOW
ALL SET (Set the Entire Screen)
ALL CLEAR (Clear the Entire Screen)
SENSITIVITY (1 ~ 120)
SHOW INDICATOR (OFF / ICON / TRACE)
DELAY OUT (1 ~ 15)
Motion Alarm Zoom-In Delay
EXIT JUMP
EXIT / SAVE&EXIT / FACTORY SET
Motion Alarm Setup
1. Go to Motion Menu
2. Set Motion to “ON”
3. Click [Set Windows] and set your area of the motion detection
4. Press the Left Arrow button, until you exit back to the Motion Menu
5. Zoom out to the farthest you want the camera to zoom out and press [7](Wide)
6. Zoom in to the farthest you want the camera to zoom in and press [8](Tele)
7. Click [Exit Jump] then click [Save & Exit]
8. Once you are out of the menu press [9](ON/OFF) to activate motion alarm
33
32