Net-2000™ Voice Codec Unit
User’s Manual
Page 12
Section 3 – Net-2000™ VCU Control
DVSI Confidential Proprietary
Figure 6 Net-2000™ VCU Status Page
(default values shown)
The Status page is designed to give the operator a operator a quick view summary of all the settings
and parameters of the Net-2000™ VCU. The page shows the current status of the Net-2000™ VCU,
information on what the unit is Encoding (sending), Decoding (receiving) and a navigation menu for
switching to pages to change system settings. The table on the left sife of the page gives the
operator view of all the set parameters for the transmission of the encoded speech (i.e. Voice Source,
vocoder mode/rate as well as Decoder Rate and output gain). The table on the right provides
information from the communications channel and configuration of the vocoder. . The operator can
control the running of the unit using the Start / Stop button at the bottom of the page.
Navigation Menu
Located across the top under the logo header the navigation menu provides the link to the six pages
used for setup and control of the Net-2000™ VCU. This menu is visible and assessable from any of
the pages. The menu item is highlighted when the page is displayed.
Figure 7 Navigation Menu
Status
Provides an overall view of what the current status is on the unit and allows start and stop of process.
VOIP Mode
Provides selection of I/O and vocoder. Also allows start and stop of process.
File Mode
Put the Net-2000™ VCU into a ready mode to accept files via Ethernet from a PC. Also allows start
and stop of process.