Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.5: 27 March 2012 (SGX-1920L_manual.doc)
Page
30 of 60
SPECIFICATIONS :
Panel compatibility
Compatible with 1920x1200, 1920x1080, 1680x1050, 1600x1200, 1440x900
1366x768, 1280x1024, 1024x768, 800x600 & 640x480 resolutions of TFT LCD
panels.
A specified BIOS and some factory adjustment may be required for individual panel
timings.
No. of colours
Up to 3 x 10 bit providing 1.06 billion colours.
Panel power
DC 3.3V, 5V, 12V
Panel signal
LVDS
Vertical refresh rate
60Hz at 1920x1200, 60Hz at 1920x1080, 60Hz at UXGA and up to 75Hz other
lower resolution
Display clock maximum
165MHz
ADC clock maximum
195 MHz
DVI differential input clock maximum
165MHz
Graphics formats
Standard VESA VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA
Other special formats through specified BIOS and factory adjustment.
Graphics auto mode detect
VGA, SVGA, XGA, SXGA, WXGA, UXGA & WUXGA interlaced and non-interlaced
Standard input at analog RGB
VGA analog (15 pin) standard with automatic detection of:
Digital Separate Sync;
Composite Sync
Sync On Green.
Video formats
PAL, NTSC & SECAM
Standard input at HDMI
Dual-Input HDMI 1.3, and DVI 1.0 compliant Receiver
Video inputs
ARGB
ARGB 2
Composite video 1
Composite video 2
Composite video 3
Composite video 4
HDMI 1
HDMI 2
Functions display
On screen display (OSD) of functions
OSD menu functions
Image controls:
Panel brightness/contrast, Saturation, Hue, Color temperature, Sharpness, Video
Scaling, PIP, OSD position, OSD timeout, Image orientation, Auto Source Seek,
etc.
OSD menu controls available
Power On/Off
Backlight brightness
OSD Menu
OSD Select up
OSD Select down
S
Setting -
Control interface
Buttons, RS-232, Remote control
Settings memory
Settings are stored in non volatile memory
PC Connectivity
VGA / SVGA / XGA / SXGA / UXGA / WUXGA analog or digital
Controller dimensions
137mm x 111mm (approx 5.4.” x 4.4”)
Power consumption
10w approx. (not including panel power consumption) for SGX-1920L
Power load maximum
The controller has an overall 3Amp current limit for PR-1200/PR-2400
Input voltage
5VDC +/- 5% for SGX-1920L
Power protection
Fuse fitted (Resettable) is equipped on PR-1200/PR-2400
DC Power handling
Reverse power polarity protection is equipped on the PR-1200/PR-2400.
Storage temperature limits
-40
o
C to +70
o
C
Operating temperature limits
0
o
C to +60
o
C
NOTES
Please note the following:
•
For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full
technical specifications for the panel from the manufacturer.
•
Re-layout and custom development services are available.
