background image

WARRANTY

The products are warranted against defects in workmanship and material for a period of one (1) year from the date 
of purchase provided no modifications are made to it and it is operated under normal conditions and in compliance 
with the instruction manual.

The warranty does not apply to:

Product that has been installed incorrectly, this specifically includes but is not limited to cases where electrical 
short circuit is caused.

Product that has been altered or repaired except by the manufacturer (or with the manufacturer’s 

consent).

Product that has subjected to misuse, accidents, abuse, negligence or unusual stress whether physical or 
electrical.

Ordinary wear and tear.

Except for the above express warranties, the manufacturer disclaims all warranties on products furnished 
hereunder, including all implied warranties of merchantability and fitness for a particular application or purpose. The 
stated express warranties are in lieu of all obligations or liabilities on the part of the manufacturer for damages, 
including but not limited to special, indirect consequential damages arising out of or in connection with the use of or 
performance of the products.

CAUTION

Whilst care has been taken to provide as much detail as possible for use of this product it cannot be relied upon as 
an exhaustive source of information. This product is for use by suitably qualified persons who understand the nature 
of the work they are doing and are able to take suitable precautions and design and produce a product that is safe 
and meets regulatory requirements. 

DISCLAIMER: There is no implied or expressed warranty regarding this material.

LIMITATION OF LIABILITY

The manufacturer’s liability for damages to customer or others resulting from the use of any product supplied 
hereunder shall in no event exceed the purchase price of said product.

TRADEMARKS

The following are trademarks of Digital View Ltd:

DigitalView 

ThinSurfer

RemoteMedia

CompactFlash is a registered trademark of SanDisk Corporation. 
Other brands and products are trademarks of their respective holder/s.

- 18 -

Summary of Contents for MV-Flash M3+




















Reviews: