22/37
SPECIFICATIONS
Panel compatibility
Compatible with 1600x1200, 1366x768, 1280x1024, 1280x800, 1280x768,
1024x768, 800x600 & 640x480 resolutions of TFT LCD panels from manufacturers
A specified firmware version and some factory adjustment may be required for
individual panel timings.
No. of colours
Up to 3 x 8 bit providing 16.7 million colours.
Panel power
DC 3.3V, 5V, 12V, 18V
Panel signal
TTL(Single pixel) / LVDS
Vertical refresh rate
60Hz at UXGA & SXGA and up to 75Hz for other lower resolutions
Graphics formats
Standard VESA VGA, SVGA, XGA, SXGA, WXGA, UXGA.
Other special formats through specified BIOS and factory adjustment.
Graphics auto mode detect
VGA, SVGA, XGA, SXGA, WXGA & UXGA interlaced and non-interlaced
Standard input at source (analog RGB)
VGA analog (15 pin) standard with automatic detection of:
Digital Separate Sync;
Composite Sync
Sync On Green.
Video formats
PAL, NTSC & SECAM
Video inputs
ARGB 1
ARGB 2
DVI
Composite video
S-Video
SD Component video (YCbCr)
Functions display
On screen display (OSD) of functions
OSD menu functions
Image controls:
Brightness, Contrast, Saturation, Hue, Sharpness, Aspect size, Color temperature,
Video Scaling, OSD position, OSD timeout, Source select, Hot keys, etc.
OSD menu controls available
Power On/Off
Backlight brightness
OSD Menu
OSD Select up
OSD Select down
S
Setting -
Control interface
Buttons, Infra-red controls, Serial Port control
Settings memory
Settings are stored in non volatile memory
PC Connectivity
VGA / SVGA / XGA / SXGA / UXGA analog or digital
Controller dimensions
179mm x 120.4mm (7.” x 4.74”)
Power load maximum
The controller has an overall 3Amp current limit.
Input voltage
12VDC +/- 5%, 10W (controller only)
Power protection
Fuse fitted (Resettable)
Storage temperature limits
-40
o
C to +85
o
C
Operating temperature limits
-40
o
C to +80
o
C**
Coating
Silicone resin conformal coating. (MOD) DEF-STAN 59/47 Issue 4 & UL QMJU2
compliant.
Calculated Mean Time Between
Failures
In excess of 150,000 hours
** Laboratory certification report available at
http://www.digitalview.com/support/downloads/HE-1600_report.pdf
.
Overall suitability for usage in critical applications must be independently tested and verified by the user.
NOTES
Please note the following:
•
For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full
technical specifications for the panel from the manufacturer.
•
Re-layout and custom development services are available.
