Digital View DT-1920-HDMI-EDPT, Instructions Manual

Page: 16 / 33

Specifications subject to change without notice
© Digital View Ltd – Ver 1.5 7 May 2020 (DT-1920-HDMI-EDPT_manual.doc)
Page 16 of 33
J6 – eDP connector: I-PEX 20455-030E-12 (Matching type : I-PEX 20454-030T)
PIN SYMBOL DESCRIPTION
1 GND Ground
2 GND Ground
3 GND Ground
4 GND Ground
5 PANEL_VCC Panel power
6 PANEL_VCC Panel power
7 PANEL_VCC Panel power
8 PANEL_VCC Panel power
9 PANEL_VCC Panel power
10 DP_TX_33V Power for connector (3.3V 500mA)
11 GND Ground
12 DPTX_HPD Hot Plug Detect
13 DPTX_AUX_N Auxiliary Channel (negative)
14 GND Ground
15 DPTX_AUX_P Auxiliary Channel (positive)
16 GND Connected to Ground (100K)
17 GND Connected to Ground (100K)
18 DPTX_L3N Lane 3 (negative)
19 GND Ground
20 DPTX_L3P Lane 3 (positive)
21 DPTX_L2N Lane 2 (negative)
22 GND Ground
23 DPTX_L2P Lane 2 (positive)
24 DPTX_L1N Lane 1 (negative)
25 GND Ground
26 DPTX_L1P Lane 1 (positive)
27 DPTX_L0N Lane 0 (negative)
28 GND Ground
29 DPTX_L0P Lane 0 (positive)
30 GND Ground
LED1 – Status LED connector: YEONHO 12513WR-03 compatible (Matching type : Molex 51146-0300 or compatible)
PIN DESCRIPTION
1 Green LED pin (anode)
2 LED pin common (cathode)
3 Red LED pin (anode)
P1 – HDMI (1.4) Micro HDMI connector (Type D)
PIN SYMBOL DESCRIPTION
1 HPDET Hot Plug Detect
2 UTILITY N.C. on device
3 DATA2+ TMDS Data2+
4 DATA2S TMDS Data2 Shield
5 DATA2- TMDS Data2–
6 DATA1+ TMDS Data1+
7 DATA1S TMDS Data1 Shield
8 DATA1- TMDS Data1–
9 DATA0+ TMDS Data0+
10 DATA0S TMDS Data0 Shield
11 DATA0- TMDS Data0–
12 CLK+ TMDS Clock+
13 CLKS TMDS Clock Shield
14 CLK- TMDS Clock–
15 CEC CEC control
16 DDC/CEC GND DDC/CEC Ground
17 SCL SCL (I²C Serial Clock for DDC)
18 SDA SDA (I²C Serial Data Line for DDC)
19 +5V +5V Power (max 50mA) EDID/DDC