DISCOVERY Plus user manual
© 2013 Digital Technology Art s.r.l.
CONNECTING CABLES AND POWER LEADS
Connect the cables between the parallel port and the camera. We advise you to execute this
operation with all the equipment turned off, for safety reasons!
The connectors are fixed with screws, which should be tightened only slightly to avoid any
damages. For the Discovery series, the power connector is connected to a 10-15V 3A power
supply. The camera is always turned on at the power supply.
Before making any connection, make sure that your computer and the power supply are turned off!
DETAILS OF THE DISCOVERY PLUS CONNECTORS
On the DISCOVERY Plus you will find the connectors required to connect the camera to the PC and
the power supply, and to mount it on a photographic tripod.
Starting from the left in clockwise
direction the following connectors are
shown :
Power connector
USB PORT: male 9-pin
connector for USB
communication with the PC
USER PORT: female 9-pin
connector which implements a
communications port in order to
drive the RPF6 filter wheel, or to
run the autoguide or the shutter signal
