Digital Snitch Sleep & Spy Clock
should see the blue light go out for a moment, then illuminate to
indicate that the camera took a snapshot and went back to standby
mode.
HOW TO SET MOTION RECORDING
1.
From standby mode, press the “motion detect” button one time. The
Sleep & Spy Alarm Clock will begin flashing and turn off when it
detects motion.
2.
To stop recording, press the “motion detect” button one time. The
blue light will turn on to indicate you are in standby mode.
HOW TO RECORD AUDIO
1.
From standby mode, press the “audio record” button one time. The
blue light will blink then turn off.
2.
To stop audio recording, press the “audio record” button one time.
The blue standby light will turn on.
HOW TO PLAYBACK
1.
Set the power switch to “ON”.
2.
Using the provided USB cable, plug the alarm clock into an open USB
port on your computer.
3.
In order for your computer to recognize the memory card, you must
press the red power button on the remote. On some computers you
may have to press the button a second time. Alternatively, you can
remove the microSD card from the device and place it in a card reader
