Professional VHF Wireless Systems
Installation and Operation
2
CAUTION!
Electrical shock can result from removal of
the receiver cover. Refer servicing to qualified service
personnel. No user-serviceable parts inside. Do not
expose to rain or moisture.
The circuits inside the receiver and transmitter have been
precisely adjusted for optimum performance and compli-
ance with federal regulations. Do not attempt to open the
receiver or transmitter. To do so will void the warranty,
and may cause improper operation.
This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does
not cause harmful interference.
This device complies with INDUSTRY CANADA R.S.S. 210,
en conformité avec IC: RSS-210/CNR210. Operation is sub-
ject to the following conditions: 1) This device may not
cause harmful interference and 2) this device must accept
any interference received, including interference which
may cause undesired operation. Changes or
modifications not expressly approved by Audio-Technica
could void your authority to operate this equipment.
Thank you for choosing an Audio-Technica professional wireless
system. You have joined thousands of other satisfied customers
who have chosen our products because of their quality,
performance and reliability. This wireless microphone system
is the successful result of years of design and manufacturing
experience.
Each DR-1000 Series professional VHF wireless system includes
a receiver and either a body-pack transmitter or a
handheld microphone/transmitter on a specific crystal-controlled
frequency.
Because DR-1000 Series packaging is designed to hold all
versions of the system, some compartments in the carton are
intentionally left empty.
The DR-R11 receiver includes a space-saving switching power
supply that automatically adapts to changes in mains voltage.
Unlike bulky linear power supplies, this switching power supply
is lightweight and compact; it uses only a single outlet space.
The versatile DR-T15 UniPak
™
body-pack transmitter has both a
high-impedance input for instruments, and a low-impedance
input with bias connection for use with dynamic and electret
condenser microphones. The DR-T16 handheld transmitter
features a unidirectional dynamic microphone element.
Both the body-pack and handheld transmitters use internal
9-volt batteries and have Off/Standby/On switches, input Trim
(level) adjustments and battery-save switches.
Introduction
See pages 8-9 for illustrations.
Notice to individuals with implanted cardiac pacemakers
or AICD devices:
Any source of RF (radio frequency) energy
may
interfere with
normal functioning of the implanted device. All wireless
microphones have low-power transmitters (less than 0.05
watts output) which are unlikely to cause difficulty, especially
if they are at least a few inches away. However, since a “body-
pack” mic transmitter typically is placed against the body, we
suggest attaching it at the belt, rather than in a shirt pocket
where it may be immediately adjacent to the medical device.
Note also that
any medical-device disruption will cease when
the RF transmitting source is turned off
. Please contact your
physician or medical-device provider if you have any questions,
or experience any problems with the use of this or any other
RF equipment.
