6
This Projector is a three-chip DLP projector with a native resolution of 1280x720 pixels (16:9 aspect
ratio). The projector accepts 720p video through a DVI-D connector on the rear panel.
3. INTRODUCTION
3
Connectors
DVI-D
Digital Video Input. Accepts 720p Video Input. Input will be displayed native to the source. To
display the full image size the source must be 1280x720 resolution.
RS-232 (SERIAL)
Serial Communications. Allows control of the projector from a computer or external control device.
For further information contact your dealer.
External INTERLOCK
Film projector lockout connector. For some installations the installer may have enabled this feature
which requires this connection to be made at all times. If a connection is made do not remove it,
doing so may prevent the projector from turning ON. For further information contact the installer.
RJ-45
Allows communications with a PC or Server.
10/100M Ethenet Media Access controller.
Switches
SHUTTER / SOFT POWER
Soft power ON/OFF and Shutter control.
POWER ON / OFF
Located just above the power connector - System Power ON / OFF.
•
•
•
•
•
•
SOFT
POWER
SHUTTER
POWER STATUS
DVI-D
SHUTTER OPEN
READY
BALLAST TEMP
FORMATTER
VALID SIGNAL
LAMP
FAN
LAMP DOOR
RS-232 (SERIAL)
IR
RJ-45
EXTERNAL
INTERLOCK
STATUS LEDs
4.CONNECTION
4
