page 10
Digital Projection M-Vision Laser 18K Series
Installation and Quick-Start Guide
REMOTE CONTROL
Rev D October 2019
17
DISPLAYPORT 1 / R / numeric input 4
Select DisplayPort 1 input.
18
HD-T / G / numeric input 5
Select the HDBaseT input.
19
3GSDI / B / numeric input 6
Select the 3G-SDI input.
20
VGA / 3D / numeric input 7
There is no VGA input on this projector.
Use with
ALT
to toggle the
3D Format
setting between
Off
and
Auto
.
21
COMP1 / EYE / numeric input 8
There is no Component 1 input on this projector.
Use with
ALT
to switch between left and right eye 3D dominance.
22
COMP2 / PIP / numeric input 9
There is no Component 2 input on this projector.
Use with
ALT
to switch on
Picture In Picture (PIP)
mode.
23
ADDR / ALL (with red indicator at the top)
Assign and unassign an IR remote address.
To assign an address:
1. Press and hold this button until the indicator starts fl ashing.
2. Release this button and while the indicator is still fl ashing, enter
a two-digit address using the numeric input buttons. The indicator
will fl ash three times quickly to confi rm the change.
To unassign an address and return to the default address 00,
•
Press and hold
ALT
and this button simultaneously until the
indicator fl ashes to confi rm the change.
Notes
This projector does not use the
following options on the remote:
HDMI 3 and HDMI 4
DVI, VGA, COMP 1 and COMP 2.
Remote control bottom
HDMI1
ALT
IN
OUT
IN
OUT
SHIFT
2
1
3
HDMI2
DVI
DisplayPort1 HD-T
3GSDI
VGA
COMP1
COMP2
HDMI3
TEST
HDMI4 DisplayPort2
R
G
B
ALL
3D
EYE
PIP
SWAP
4
5
6
7
8
9
0
ALT
ADDR
A
B
C
D
USER PRESET
23
18
19
17
20
21
22
Pic Mute
OPEN
CLOSE
OFF
ON
OSD
OFF
ON
Remote control top
