page 58
Digital Projection E-Vision Laser 4K Series
Operating Guide
USING THE PROJECTOR
Rev A June 2017
3D menu
Use this menu to enable, disable and set up 3D input, as follows:
•
3D Format
—
Off
,
Auto
,
Dual Pipe
and
Frame Sequential
.
Frame Sequential
is displayed at the incoming rate whereas
Dual Pipe
interleaves
the input to display up to 120 Hz.
•
DLP Link
—
Off
/
On
.
DLP Link On
emits a sync pulse for the 3D glasses via the projected image.
DLP Link Off
will send the sync pulse to the sync out connector to use with an
external third party emitter.
•
Eye Swap
—
Normal
and
Reverse
(set to
Reverse
if the left- and right-eye images
are displayed in the wrong order)
•
Dark Time
—
0.65 ms
,
1.3 ms
and
1.95 ms
. Set to reduce the effect of images
overlapping while the glasses are switching.
3D Sync
•
Offset
— use the
LEFT
and
RIGHT
arrow buttons to compensate for signal
processing delays in the projector.
•
Reference
—
External
and
Internal
.
Notes
3D video is only possible on the
HDMI 3 and HDMI 4 inputs.
While the projector is in 3D mode,
the OSD is unavailable. Settings
can be accessed via web pages
served from the projector. For
more information, see
.
If
3D Format
is set to
Off
, all other
3D settings will be unavailable.
For further information about
in the
Connection
Guide
.
When 3D is on, the following
settings become unavailable:
•
Image
>
Smooth Picture
,
Brightness
,
Contrast
,
Saturation
,
Hue
,
Sharpness
,
Noise Reduction
,
Freeze
,
Resync
.
•
Color > Color Space
.
•
Geometry > Aspect Ratio
,
Digital Zoom
,
Overscan
.
•
Setup >
Screen Setting
,
Auto Source
,
Trigger-1
,
Trigger-2
.
•
PIP >
all settings.
See also
further in this
guide.
Signal Input Modes > 3D formats
in the
Reference Guide
for 3D
resolutions and frame rates.
3D
DLP Link
Eye Swap
3D Format
Dark Time
Off
Normal
Auto
1.95 ms
Reference
Offset
Internal
100
3D Sync
