page 13
Digital Projection E-Vision 6900 Series
Installation and Quick-Start Guide
CHANGING THE LENS, LAMPS, FILTER AND COLOR WHEEL
Rev A February 2017
Changing the filter
1. Loosen the captive screw at the bottom of the
filter door.
2.
Remove the door and the filter as shown in the
illustration.
3.
Replace the filter, then close the door and
tighten the screw to secure it in place.
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
The lamp must be changed only
by suitably qualified personnel.
The projector will shut down if the
cover is opened whilst in operation.
The filters should be changed at the
same time as the lamp is changed.