page 6
Digital Projection 0.38:1 E-Vision Ultra Short Throw Lens
Installation Guide
INSTALLATION INSTRUCTIONS
Rev B June 2019
7. Connect the power cable and the input source to the projector and turn it on.
8. From the
Lens
menu, select
UST Lens
, then execute the
Center Lens
command.
9. Select a
Crosshatch
test pattern for focus adjustment: on the remote control,
press
TEST
, then change the test pattern using the
LEFT
and
RIGHT
arrow
buttons.
10.
If the top of the cabinet obstructs part of the projected image, adjust the lens
position: on the remote control, press
OK
to enter LENS ADJUSTMENT
mode, then press
OK
again to switch from
Zoom/Focus Adjustment
to
Shift Adjustment
. Use the arrow buttons to adjust the lens position.
11. Return to
Zoom/Focus Adjustment
mode and press:
•
Focus +/-
to adjust focus in the central area of the image (yellow outline).
•
Zoom +/-
to adjust the top and bottom of the image (red outlines).
12.
Once focus and zoom are adjusted, tighten the screws that support the lens.
Notes
The lens should only be used on
flat surfaces and must be aligned
parallel to the screen.
Achieving even focus can be
challenging. For best results, switch
between the focus and zoom while
ensuring that the lens is supported
correctly.
Lens
Lens Control
Center Lens
Lens Lock
Lens Type
Lens Memory
Off
UST Lens
