Digital Monitoring Products
XR500/XR500N Installation Guide
2
INTRODUCTION
Panel Features
2.1 Description
The DMP XR500/XR500N Command Processor™ Panel is a versatile 12 VDC, combined access control, burglary, and
Þ
re communicator panel with battery backup. The XR500/XR500N provides eight on-board burglary zones and two
on-board 12 VDC Class B powered zones. The powered zones have a reset capability to provide for 2-wire smoke
detectors, relays, or other latching devices. The XR500/XR500N can communicate to one or two DMP SCS-1/SCS-1R
Receivers using digital dialer or network communication, or to non-DMP receivers using the Contact ID format.
Figure 1: Typical XR500/XR500N System Con
Þ
guration
AC
1
2
3
4
5
6
7
8
10
11
12 13
14
15 16
17
18 19
9
20
21 22
23
24 25
26
27
28
+B
BELL GND
SMK GND
RED YEL GRN BLK
Z1
Z2
Z3
Z4
Z5
Z6
Z7
Z8 Z9+ Z9- Z10+ Z10-
AC
-B
GND
GND
GND
GND
K6
K7
Output 1
Output 2
J3
Phone Line
J10
J22
LX-Bus
Battery
Start
J23
J21
RS-232
Power
LED
J8
PROG
J4
Tamper
J16
Reset
Out1
Out2
Outputs 3-6
J11
3
4
5
6
J2
J1
Ethernet
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Power LED
Link LED
S
*
* *
*
*
*
*
*
*
*
*
*
*
*
*
Model 481, 462N,
462P, 462FM, and
472 Interface Cards
Model 461 Interface
Adaptor
S
715 Zone
Expander
Smoke and Heat Detector Circuits
Alarm Horns
H
H
H
FIRE
Manual Pull
Station
Fire Bell
6155LX PIR
PIR
6155LX PIR
PIR
S
S
5845LX Glassbreak
Detector
Door
Contact
FIRE
Manual Pull
Station
Window
Contact
H
Heat
Detector
Window
Contact
714 Zone
Expander
711 Zone
Expander
521LX (T)
Smoke
Detector
SLR Series
Smoke
Detector
Single 4-Wire
Cable
Up to 100 Zones
and Relays on
each LX-Bus
717 Graphic
Annunciator
Module
Graphic Annunciator
716 Output
(Relay)
Expander
Exterior
Lighting
XR500/XR500N Command Processor™ Panel System
LX-Bus Expansion
Keypad Expansion Bus
711 Zone
Expander
711 Zone
Expander
Door
Contact
Window
Contact
Strobe
Roll-Up
Doors
791, 793 Security
Command Keypad
Proximity
Reader
5845LX
Glassbreak
Detector
Single 4-Wire Cable
6155LX PIR
PIR
6155LX PIR
PIR
733 Wiegand
Interface Module
Proximity
Reader
Keypad Bus - You can connect any combination of Security Command
Keypads, 6155LX PIRs, 5845LX Glassbreaks, or 711, 714, or 715 Zone
Expanders. Up to 64 zones with all 16 devices.
790, 791, 793 Security
Command Keypad
OVC
2.2 Zone
Expansion
Up to 574 additional zones are available on the XR500/XR500N using DMP Security Command keypad remote zone
capability and zone expansion modules. The panel keypad data bus supports up to sixteen supervised device
addresses with each address supporting up to four programmable expansion zones.
Up to 500 zones are available using the on board LX-Bus, Model 461 Interface Adaptor, 481, 462N, 462P, 462FM, or
472 Interface Cards, and any combination of single, four, eight, or 16-zone expansion modules and single-zone
LX-Bus™ detectors.
Note:
Do not use shielded wire for LX-Bus or Keypad Bus circuits.
2.3 Output
Expansion
In addition to the two SPDT relays and four open collector outputs on the XR500/XR500N, you can also connect up to
25 Model 716 Output Expansion Modules to each LX-Bus. These modules can provide an additional 500 programmable
SPDT relays.
The XR500/XR500N provides 100 Output Schedules you can use for programming the 716 to perform a variety of
annunciation and control functions. You can also assign the 716 outputs to any panel Output Options such as Fire
Alarm, Communication Fail, or Phone Trouble Outputs. Refer to the 716 Installation Guide (LT-0183).
The LX-Bus™ also supports the Model 717 Graphic Annunciator Module. Each 717 module supplies 20 switched
ground outputs that follow the state of their assigned zones. Refer to the 717 Installation Guide (LT-0235) for more
information.
