Digital Millwork Deluxe kits are very complete requiring only your radio, battery, and
chosen propulsion system.
Items included in kit:
CNC Cut white Depron Foam, balsa and ply parts
Carbon
Fiber
pushrods
Control horns
Carbon fiber rods for undercarriage construction
Wheels
Velcro for battery/radio mounting
Instruction manual on CD-Rom
Printable graphic files of insignia and pilot
Items needed to complete deluxe kit:
4 Channel Receiver and 3
Servos:
Servo cutouts are sized for GWS Pico servos, usa a
small 4 channel receiver such as GWS pico, Berg
microstamp etc.
Recommended motors and
ESC:
Mounts are included for IPS mount, spindle
mount, front collar or rear flange mount.
Brushless motor recommended for 3D
performance.
Brushed:
GWS IPS ‘S1’ (IPS-DX2BB-1XCS)
GWS ICS 100 Electronic Speed
Control or similar
Prop: GWS 8060 SF
Brushless:
CD rom size brushless motor such as
17 or 25 turn or AXI 2204
series
Castle Creations Phoenix 10 ESC or
similar
Prop: GWS 8040 DD
Battery:
Small 7.4V Lithium Poly battery in 700mah to 1320
mah range
Glue:
Odorless Medium CA and foam safe accelerator plus
Contact Cement, Hot melt glue, or Gorilla glue
Tape:
Control services can be hinged with clear packing
tape, Medex tape or with hinges of your preference.
Other common building supplies including: 1/8” drill bit, straight edge, scissors, sand
paper, hobby knife, small square, pins etc.
2
Summary of Contents for Little Baron Fokker DR I
Page 28: ...o Build and install Rudder pushrod using the 8 3 4 1 5mm CF rod 28...
Page 32: ...32...
Page 33: ...33 33...
Page 34: ...34...
