Digital Guard Dawg Watch Dawg-X2, Functions And Operating Instructions

Page: 3 / 6

With the Engine off press the start button (lightning bolt icon) on the transmitter twice within 3
seconds, the bike will start automatically within 1 second. After successfully starting the transmitter will
illuminate the exhaust icon and will beep 3 times. The engine cannot be shut off until the UNLOCK
(unlock icon) button is pressed.
Prompt to set Alarm
After stopping the bike if the alarm is not set within 8 seconds the bike will make 3 beeps and flash the
turn signals 3 times, to remind the rider to arm the bike.
Remotely killing the Bike
When the Bike is driving, hold down the LOCK (lock icon) button for 2s or longer, the turn signals will
flash rapidly as the bike starts to enter anti ‐ theft mode. The horn of the bike will make a loud sound, the
turn signals will flash, and the vehicles engine will die 20 seconds later. This state can only be stopped by
pressing the UNLOCK (unlock icon) button.
To Shut off the Remote Start
While the bike is running (due to a remote start), press the unlock (unlock icon) button to remotely stop
your bike.
Automatic Re ‐ arm
While the bike is armed if the UNLOCK (unlock icon) button is pressed the alarm will disarm, lf the bike is
not started within 25 seconds the alarm will automatically re ‐ arm itself. The transmitter will beep upon
arming indicating it has re ‐ armed. The bike will also beep indicating it has re ‐ armed.