Picture Porter
User’s Guide
FCC Rules and Regulations – Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause undesired
operations.
The device has been tested and verified to be within the energy emission limits for Class B digital
devices as defined in Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential situation. This device generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Installed correctly, it probably will not interfere
with your radio or TV. However, we do not guarantee the absence of interference.
If you modify the device in any way, without approval from Digital Foci, Inc., your device may violate
FCC regulations. Violation of FCC regulations may cause the FCC to void your rights to use the
modified device.
If you suspect this device is causing interference, power off and on the device while your radio or TV is
showing interference. If the interference disappears when you turn the device off and reappears when
you turn the device on, something in the device is causing interference.
To reduce interference, try these suggestions:
•
Change the direction of the radio or TV antenna.
•
Increase the separation between the device and radio or TV.
•
Connect the device into an outlet on a circuit different from that to which the radio or TV is
connected.
If these suggestions don’t help, consult your computer dealer or an experienced radio/TV technician for
more suggestions.
Page 54
Revision 1.6