MENU
( )
( )
T( )
W( )
DC
VIDEO
ELC
V.PHASE
MENU
( )
( )
T( )
W( )
CONTROL
VIDEO OUT
Class 2 Only
DC 12V
It is a terminal that controls the function of the camera at long distance.
1 2 3 4 5
It is the function that can turn on external IR LED Lamp by detecting the sensitivity
on CDS when the Day / Night mode is set "Auto" on the OSD menu of the camera.
It is the function that can be switched to DAY Mode or NIGHT Mode by receiving
the Day/Night on/off signal from external light sensor or IR LED LAMP.
When Day / Night Mode is set " External" on the OSD menu of the Camera.
Open contact : DAY
Close contact : NIGHT
3
4
GND
Day/Night Out
5V / 10mA
0V
: IR LED ON(NIGHT)
: IR LED OFF(DAY)
4
5 D/N ON (EXT)
GND
TD
RD
GND
NAME
1. Frame GND
2. RD
3. TD
4. DTR
5. Signal GND
6. DSR
7. RTS
8. CTS
9. RI
PC Interface
DVR Interface (RS-485 Communication)
Tx +
Tx -
Rx +
Rx -
3
4
5
2
1
8
9
7
6
R +
R -
T +
T -
RS-232C D-Sub Connector (PC)
RS-232C TO RS-422 Converter
TRX +
TRX -
R +
R -
DVR (RS-485)
No.
Function
1
2
3
4
5
R+ (RS-485)
R- (RS-485)
DAY/NIGHT OUTPUT "H"
GND
DAY/NIGHT INPUT(EXT) "L"
Remote Jack
Remote Input Jack (RS485)
DAY / NIGHT Output
DAY / NIGHT External Input
19
COLOR VIDEO CAMERA
18
COLOR VIDEO CAMERA
17
COLOR VIDEO CAMERA
16
COLOR VIDEO CAMERA
Each model has different power specification, please check the name of
the model and power specification before connecting to power source.
Please refer to the sticker identifying the model, which is attached on the
product, for power specification.
The wire is polarized. Be careful of polarity.
Use DC 12V power source.
Class 2 Only
DC12V
Resistance of copper wire [at 20
℃
(68
˚
F)]
. As voltage may drop according to the length of electric cord as above
table, a camera may malfunction if too long output line of adaptor is
connected to the camera.
* Voltage for camera operation: DC 12V
±
10%
* Voltage drops on above table are variable according to types of electric
cord and makers.
Copper wire size
(AWG)
Resistance(
Ω
/m)
#18
(0.83
㎟
)
Voltage Drop(V/m)
#24
(0.22
㎟
)
#22
(0.33
㎟
)
#20
(0.52
㎟
)
0.078
0.050
0.030
0.018
0.028
0.018
0.011
0.006
Connecting to Power
For DC 12V Power Type
The wire is non-polarized.
Use AC 24V power source or DC 12V power source.
Class 2 Only
AC24V/DC12V F.G
For AC 24V / DC 12V Power Type
Notes
. Be sure to connect power after all the installation is done.
. Note that AC adaptor is not supplied with camera.
. Use only AC 24V / DC12V UL listed class 2 power supply.
. Do not use power sources other than that specified.
For AC 100V ~ AC 240V Power Type
MENU
( )
( )
T( )
W( )
DC
VIDEO
ELC
V.PHASE
MENU
( )
( )
T( )
W( )
DC
VIDEO
ELC
V.PHASE
Connect the VIDEO out jack to the monitor video in jack.
Camera
CCD Camera
Intermediate
Video Receiver
End monitor
As the connecting method varies with the instruments, refer to the
manual supplied with the instrument.
Connect the cable after power is turned off.
Set the 75
Ω
/ Hi-Z selection switch as shown below if you have an
intermediate device.
Monitor
Connecting to Monitor
For BNC Video Output Model
DC
VIDEO
ELC
VIDEO OUT
POWER INLET
MENU
( )
( )
T( )
W( )
CONTROL
