Digital Equipment RapidPrint 500, Reference Manual, Page: 49 / 192

Server Configuration
Quick Reference
4 -
9
4.8 Quick Reference
LAT Server Parameters
To Use This Command Example(s) What Example Does
Set Server Identification
Parameters Set/Define Server Name
SET SERVER NAME “Server_1”
Gives the server a unique name to use on
the LAT network.
See Server Identification for more informa-
tion.
Set/Define Server Identification
SET SERVER IDENTIFICATION
“Biolab Server: printer
available”
Gives more detailed information about
the server to be used for server queries.
See Server Identification for more informa-
tion.
Change the LAT Net-
work Timers Set/Define Server Circuit Timer , Set/
Define Server Keepalive Timer , Set/
Define Server Multicast Timer
These timers should not have to be
changed under normal circumstances.
See Network Timers for more information.
Change the Retransmit
Limit Set/Define Server Retransmit Limit See above.
Specify a LAT Node
Limit Set/Define Server Node Limit
SET SERVER NODE LIMIT 5
Allows the RapidPrint 500 to store infor-
mation for up to five LAT nodes.
See Node Limit for more information.