
Set/Define Server Loadhost
11 - 26
11.54 Set/Define Server Loadhost
Specifies the TCP/IP host from which the RapidPrint 500 requests its runtime code. For LAT-load-
ing servers, this command has no function.
Restrictions
You must be the privileged user to use this command.
Parameters
Secondary
Allows you to specify a backup loadhost for use when the primary load-
host is unavailable.
IPaddress
Specify the address in standard numeric format. Specifying “0.0.0.0” as
the address clears the previously-defined loadhost. No text host names
can be used.
Examples
Local> DEFINE SERVER LOADHOST 193.23.71.49
Local> DEFINE SERVER SECONDARY LOADHOST 192.0.1.89
See Also
;
.
11.55
Set/Define Server Login Password
Specifies the password that is used to log into the server from the network. If the password is not
given on the command line, the user will be prompted for it; it will not be displayed when typed.
Users will only be required to provide this password if their ports also have Port Password
enabled.
Restrictions
You must be the privileged user to use this command.
Parameters
passwd
Enter a password of up to 6 alphabetic characters.
Examples
Local> SET SERVER LOGIN PASSWORD
Password> platyp (not echoed)
Verification> platyp (not echoed)
Local>
See Also
;
SET
DEFINE
SERVER SECONDARY
[
]
LOADHOST IPaddress
SET
DEFINE
SERVER LOGIN PASSWORD
[
]
passwd
[
]
Summary of Contents for RapidPrint 500
