Digital Equipment FP-2500T, User Manual

Page: 23 / 83

FP-2500/FP-2600 Series User Manual
2.3 Interface Specifications
2-4
2.3.1 Analog RGB Interface
2.3 Interface Specifications
Input signal type Analog RGB
Input signal characteristic Image signal: analog RGB
Synchronous signal: TTL level, negative true or positive true
Scanning type: non-interlaced
Setting via OSD
(On Screen Display) CONTRAST
BRIGHTNESS
H-POS
V-POS
H-SIZE
PHASE
BACKLIGHT
DEFAULT (ALL CLEAR)
The number of dots (pixels) displayed are as follows:
Resolution
H Sync.
(kHz)
V Sync
(Hz)
Dot Clock
(M Hz)
Screen
Resolution
Expansion
(H : Horizontal)
(V : Vertical)
Display
Resolution
640×350
*1
31.469 70.000 25.175 640×420
640×400 31.469 70.000 25.175 640×480
640×400 24.827 56.420 21.053 640×480
640×480 31.469 59.992 25.175 ×1.0 640×480
720×350 *
1,2,3
31.469 70.000 28.320 640×420
720×400
*2,3
31.469 70.000 28.320 640×480
×1.0(H)
×1.2(V)
×1.0(H)
×1.2(V)
FP-2500 Series
* 1 When the 350 pixel (vertical) signal setting is selected, 400 pixels, including 50 pixels
at the top and at the bottom of the screen, will be enlarged and displayed at 480 pixels
(1.2times).
* 2 Select "720 x 400 Display Resolution 720 x 400 DSP" in the OSD (On Screen Display)
"System Setting" screen.
* 3 When the 720 pixel (horizontal) signal setting is selected,
- When "720 x 400 DSP" is ON; only 640 pixels are displayed (80 pixels are not
displayed.)
- When "720 x 400 DSP" is OFF; all pixels are displayed but images may be partially
cut off.