How to Access Local Programs,
Continued
Using Console
Commands
Some systems allow you to access the local programs using
console commands. The command you use depends on whether
your system uses a Q–bus adapter such as the KFQSA module,
or an embedded adapter such as the KA640 module.
Q–bus
Adapters
To access a local program from a system with a Q–bus adapter,
use the command:
>>> SET HOST/UQSSP/DUP/DISK # taskname
taskname = name of the local program
# = controller number of the ISE
To find the controller number, type SHOW UQSSP at the
console prompt (>>>). An example of the SHOW UQSSP
command is:
>>> show uqssp
UQSSP Disk Controller 0 (772150)
-DUA0 (RF31)
UQSSP Disk Controller 1 (760334)
-DUB1 (RF31)
UQSSP Disk Controller 2 (760340)
-DUC2 (RF31)
UQSSP Tape Controller 0 (774500)
-MUA0 (TK70)
>>>
Continued on next page
4–5
