Digital Equipment DEC WANcontroller 622 Problem Solving Download Page 2

Users are referred to
these cards if there is
a possible problem
with the line card and
its components.

DEC Network Integration Server Problem Solving

DECNIS Problem Solving Manuals

Network Interface Card (NIC) Problem Solving cards: are supplied with each NIC.
The cards outline procedures for checking possible problems with NICs, their cables,
distribution panels and modems.  Start problem solving with the flowchart.

DECNIS Installation and Service Manual: includes a problem solving section which
outlines procedures for checking hardware problems.

Loopback Connectors

DNSXT–CA

H3198
H3250

Part Number

DEC Network Integration Server Problem Solving: outlines NCL commands for
checking software problems.

DEC  Network Integration Server Event Messages:  this is an on-line text
file.  The file lists event messages that can indicate faults with hardware and
software.  The  event message describes the meaning of each event and
what action to take.

50-way loopback connector (male)

V.36/V.11, EIA-422
V.35

Loopback Connector

NIC

Adapter cable and
extension cable

Component

 

Kilostream is a registered trademark of British Telecommunications, plc.

There is no loopback test for X.21 leased line or BT Kilostream.  If you are unable to
solve your problem, contact Digital Services.

Note for X.21 leased line and BT Kilostream 

LKG–5721–91I

 

2

Summary of Contents for DEC WANcontroller 622









Reviews: