Digital Equipment DEC 10000, Service Manual

Page: 30 / 70

2-4 Servicing the CPU
Table 2-1 EEPROM Environment Variables (Continued)
Environment
Variable
Default
Value Variable Description
cpu_enabled
0xff A bitmask determining which CPUs are
enabled to run (leave console mode). If
not defined, all available processors are
considered enabled
cpu_primary 0xff A bitmask indicating which CPUs are eli-
gible to become the primary processor,
following the next system reset. If not
defined, all available processors are con-
sidered enabled.
d_harderr Halt Determines action taken following a hard
error. Values are
halt
and
continue
.
Applies only when using the
test
com-
mand.
d_report Summary Determines level of information provided
by the diagnostic reports. Values are
summary
and
full
. Applies only when
using the
test
command.
d_softerr
Continue Determines action taken following a soft
error. Values are halt and continue .
Applies only when using the test com-
mand.
dump_dev Null Device to which dump file is written if
system crashes (DEC 10000 only).
enable_audit
On If set to on , enables the generation of
audit trail messages used to track boot to
determine location of boot failure.
interleave
Default The memory interleave specification.
Value must be default (memory configu-
ration algorithm that attempts to maxi-
mize memory interleaving is used),
none , or an explicit interleave list.
language English Determines whether system displays
message numbers or message text. De-
fault value is 36 (English).