Digital Equipment AlphaStation 600, Installation Information

Page: 2 / 8

2
Table 1 (cont.) Parts List
Part Description Part Number Qty.
20 Cable Clamp, screw mounted 90-07082-00 10
21 Chassis slide, ball bearing 12-44373-01 2
22 Keps nut #6-32 90-06560-00 4
23 Installation sheet EK-RMALP-IN 1
24 Not used
25 Not used
26 Keps nut #8-32 90-06563-00 2
27 Bracket, Cable Mngt 74-48881-01 1
28 Nut, u-nut 90-07786-00 4
29 Stabilizer bracket 74-48996-01 1
30 Actuator Latch 74-48997-02 1
31 Nut Plate 74-48998-01 1
32 Set Screw #6-32 90-06291-10 2
33 Screw # 10-32 90-00063-37 2
34 Screw, machine 90-06231-09 8
35 Washer, lock 90-07651-00 8
36 Pan head sems screw #8-32 90-09312-00 6
Installation Requirements
System installation requires the following:
•
A cabinet with an internal rail dimension range of 24.25 inches to 25.0 inches.
•
A vertical cabinet mounting space of 10.5 inches for the shelf assembly.
•
The chassis slides must be installed at the first hole above a one-half inch RETMA space.
Some cabinets or configurations may require cable retraction or cable management devices other than the one
included in this kit.
Required Installation Tools
To install your rackmount kit, you need the following tools:
•
Wrench to tighten the ball studs
•
Socket wrench to install the front bezel to the tray
•
Phillips-head screwdriver
•
Flat-head screwdriver