DIGITAL Server 7100R Series
12
Creating server utility and device driver diskettes
If desired, you can create the required diskettes from
Windows-based workstations using these procedures:
1.
Locate the Quick Launch CD-ROM disc in your Server-
WORKS software kit. Insert the CD-ROM disc into the
CD-ROM drive.
2.
From the Start Menu, select
Run qlaunch.exe
from the
root directory of the CD-ROM disc. The program will
start automatically if Windows 95 or Windows NT V4.0
and greater are installed.
3.
Select the
Installations & Utilities
button.
4.
Choose either the
Create Diskettes
tab or the
Utilities
tab.
Utilities
is the default. If you choose
Create Disk-
ettes,
first select a model, then a network operating
system and its version. Select Continue. If you choose
Utilities,
select a server model to see the utilities for
that server.
5.
Select the utility or driver you want, then select
Continue.
6.
Insert a formatted, high density diskette into Drive A
and select Continue.
NOTE
For more information, refer to the
ServerWORKS Quick
Launch Getting Started
guide and the on-line help in the
ServerWORKS Quick Launch program.
The following is a list of device drivers you might need:
■
SCSI—enables your server to operate using the factory-
installed Adaptec SCSI adapter.
■
Video—enables your server to operate using the on-
board video controller or other supported video cards.
■
RAID—enables your server to operate using a Mylex
RAID controller.
■
Network—choose from several device drivers for
DIGITAL supported network interface cards.
The following is a list of bootable server utilities:
■
SCU—enables you to make a bootable SCU diskette for
use when configuring your server and adding options.
■
RAID—enables you to make a bootable RAID configura-
tion utility diskette for use when configuring your
RAID array.
■
Diagnostics—enables you to make bootable diskettes
for use when troubleshooting your server.
10
