Digital Electronics FP790-T21, Installation Manual

Page: 2 / 16

- 2 -
The FP79*-2* units are CE marked, EMC compliant products.
<Complies with the following Standards>
• Safety
EN60950
• EMI (EN50081-2)
EN55011 group1 (Class A)
• EMS (EN61000-6-2)
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6,
EN61000-4-8, ENV50204
If the following requirements are not met, the FP may fail to meet EN60950
standard requirements.
• The FP must be used as a built-in component of an end-use product.
• Use the FP indoors only.
• When connecting the FP’s power cable, be sure to use a cable that is appropriate
for the current and voltage used and that has conductive wires that are 0.75 mm
2
or
larger.
• When using the FP in an end-use product, be sure to install the FP unit's power cut-
off switch where the operator can easily reach it.
• There is a danger of explosion if the backup battery is incorrectly replaced. This
battery should be replaced only with same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
• Be sure the FP unit's enclosure is an EN60950 approved sheet steel structure.
CE Marking Notes
Package Contents
The FP package should include the following items:
„ „ „ „ „
FP Unit
(FP790-T21)
„ „
„ „
„
Installation Gasket
„ „ „ „ „
Installation Guide
(This document)
FP790-T21
Installation
Guide
„ „
„ „ „
Installation Brackets (12)
„ „ „ „ „
CD-ROM (1)
*1
(Contains the FP User
Manual’s PDF file.)
These items have all been carefully packed with special attention to product quality. However,
should you find any item(s) damaged or missing, please contact your FP distributor immediately
for prompt service.
*1 For a description and usage of the application programs stored in the CD-ROM, see the
“READM_E.DOC” file.