E-3
• Do not store or use the ST where chemicals (such as organic solvents, etc.)
and acids can evaporate, or where chemicals and acids are present in the
air.
Corrosive chemicals:
Acids, alkalines, liquids containing salt
Flammable chemicals: Organic Solvents
• Do not use paint thinner or organic solvents to clean the ST.
• Do not store or operate the LCD display in areas receiving direct sunlight,
since the sun's UV rays may cause the LCD display quality to deteriorate.
• Storing this unit in areas at a temperature lower than is recommended in this
manual's specifications may cause the LCD display liquid to congeal,
which may damage the panel. Conversely, if the storage area temperature
becomes higher than the allowed level, the LCD liquid will become isotro-
pic, causing irreversible damage to the LCD. Therefore, be sure to store
the panel only in areas where temperatures are within those specified in this
manual.
• After turning the ST OFF, be sure to wait a few seconds before turning it
ON again. If the ST is restarted too soon, it may not start up correctly.
• Due to the possibility of unexpected accidents, be sure to back up the ST
screen data regularly.
About the ST’s Display Panel
• The ST's currently displayed data, its voltage*1 and brightness setting each
affect the intensity of Contouring. (i.e, when some parts of the screen are
brighter than others, creating a wavelike pattern)
• There are minute grid-points (dark and light) on the Display Panel’s surface.
This is part of the ST’s design and not a defect.
• Extended shadows, or “Crosstalk” may appear on the sides of screen im-
ages. This is normal for an LCD display.
• Sometimes the display area may look as if the display colors have changed.
This is a common attribute of LCD’s and is not a defect.
• Displaying a single image for long periods can cause an afterimage to re-
main when the display is changed to another screen.
* Use the ST’s “Stand-by Mode”, which automatically turns the screen OFF
when there is no input for a specified period of time.
* Do not display any single screen for a long period of time. Try to
periodically change the screen display.
This mark is applicable only in Taiwan.
