-1-
• Be sure to confirm that the PL unit’s power cord is disconnected prior to
installing PL-FD200, in order to prevent electrical shock.
• Do not attempt to modify the PL-FD200, due to the danger of fire or
electrical shock.
• Prior to installing the PL-FD200, be sure to read this Installation Guide's
“2. Installation” section completely to ensure that this unit is correctly
installed.
To Prevent Accidents
• Since the PL-FD200 is a precision instrument, be sure that it is neither
hit by nor pressed strongly against another object.
• Be sure that water, liquids, or metal particles are not allowed to contact
or enter this unit. Either of these may cause either a breakdown or an
electrical shock.
• Do not install or operate this unit in a location where there is direct
sunlight, excessive heat, dust or vibration.
• Do not store or operate this unit near chemicals, or where there are
chemical fumes.
• Do not use the PL-FD200 in locations where corrosive gasses are
present
• To prevent damage to file data, be sure to shut down the PL unit's OS
before turning OFF the main power.
Warning - Safety Precautions
The PL-FD200 (FDD Unit) is an internally mounted 3.5 inch floppy disc
drive unit, designed for use with Pro-face’s Panel Computer, hereafter
referred to as the “PL.”
Corresponding PL unit: PL-X900,PL-X920 Series Units
All product names used in this document are the trademarks of their respective
manufacturers.
Pro-face: Digital Electronics Corporation
!!!!!
PL-FD200
Installation Guide
