Digital Dream Standalone Motion Controller
DDCS-Expert Users Manual
Page-35
The Figure 5-3 shows the Main Page of the DDCS Expert. It is divided into status column,
coordinate display column, basic parameter column, and notification column. In total, it is
divided into 19 sections in detail. Here the detailed description of the 19 sections :
1、 XYZAB Coordinate
This column shows the Machine coordinate and Current coordinate value of XYZAB axis. The
display range is -99999.999 ~ +99999.999 in mm;
2、 Status
When the controller runs the G code file, it will show the current operation line and opera-
tion status.
3、 Feed status
This window shows the feed status of CONT.
AUTO: displayed while processing and executing the G code file
CONT: indicates Jog CONTINUOUS. You can Jog manually with the “ - ”or “ + ” keys of X Y Z
and A and B.
STEP: Indicates STEP Jog mode.You can Jog manually in a defined distance with the “ - ”or
“ + ” keys of X Y Z and A and B.
MPG: Only when shift to MPG mode, you can operate MPG on the controller.
4、 Operating Status
This column shows the operating state. The status and implications can be displayed as
follows:
Busy: Operation is running
Reset: Reset flashing = controller not active. To activate the controller click Reset
READY: Ready state. Controller is ready and all operations can be performed
5、 Processing file
This column shows the name of the processing file and file path.
6、Software Interface
This column shows the current software interface.
7、Date and working time
This column shows the date and working time. The Date can be reset.
