Copyright 2006-2014 Digital Dowsing LLC.
www.digitaldowsing.com
Xcam SLS Quick Start Guide
Turning on your Xcam SLS
1. Turn on the tablet.
2. Carefully, attach the Camera Cord to the Micro-
USB Connector on the tablet.
3. From the Start Menu, swipe down and access the
desktop. On the desktop click the Xcam SLS icon
to start the program.
4. The program will to take 15 seconds or so to load.
You will see a black screen until then.
Video Capture -
tap once and wait for the countdown
to turn video capture on. Everything within the green
brackets will record even if you open another program
on top. The Video files are stored on the tablet for easy
retrieval.
NOTE
:
You cannot watch video you have captured while
SLS is running.
Capture Screen -
tap to enable/disable screenshots. You
can use the slider to adjust the interval.
Turning off your Xcam SLS
1. Turning off the tablet will turn off the Xcam SLS.
2. Do not put the tablet to sleep. If you put the tab-
let to sleep, the camera will remain on.
3. Wait a few moments to be sure the red light on
the bottom of the unit turns off.
For best results fully charge your Xcam SLS!
Installing the Hand Grip
The handle will screw in clockwise.
For best results, tighten the hand grip with the grip 45
degrees from final placement. Once the hand grip is
firmly attached, turning the hand grip 45 degrees to the
center. This will firmly connect the hand grip without
breaking the device.
Installing additional programs can cause problems with your Xcam SLS and is not recommended.
We offer a
One Year Limited Warranty
on parts.
Setting up the Xcam SLS
1. Charge your unit by
carefully
plugging in
the enclosed charging cable into the Micro-
USB connector.
2. Turn on the tablet.
3. The tablet will require you to activate
Windows, just like any store bought device.
4. After your unit is charged, disconnect the
charging cable.
5. Carefully connect the Camera Cable to the
Micro-USB connector on the tablet.
Be Careful!
The Mirco-USB is delicate. Be gentle with
your Xcam SLS.
For complete instructions:
http://digitaldowsing.com/product/xcam-sls/
v1.1