6
OPERATION
Connect the AC adapter as described on
page 4; the Power indicator on the
Speaker System will light red.
1
For the Disney Digital Music Player
(DDA8040):
Slide the Power switch on the
DDA8040 to the ON position. Then insert
the unit directly onto the Audio Input plug
and the USB jack. After a few seconds, the
unit will start playback automatically. The
sound will be heard through the Speaker
System and the lights around the
speakers will flash randomly.
NOTE:
For
the DDA8040, if the unit is in the Stop
mode, after two minutes, it will start
playback again automatically. If you don't
want it to start playback again, you should
unplug the unit from the Speaker System.
2
For another MP3 player:
Connect the MP3
Player as described on the next page, then
refer to the owner's manual of the MP3
Player to start playback. The sound will be
heard through the Speaker System and the
lights around the speakers will flash
randomly.
3
Adjust the volume by rotating the Volume
control at the top of the Speaker System
and the Volume control of your MP3 player.
When finished, unplug the Speaker
System and the MP3 player.
4
NOTE:
•
If the lights around the speakers do not flash randomly during playback, increase the
volume level of your MP3 player.