Digital Ally, Inc.
|
DVM Operation
4-3
DVM-800 Operation Guide
|
860-00186-00 Rev L
4.6 DVM Menu Functions
The Setup Main menu screen provides access to DVM-800
user configurable settings. Press the Menu/Select
button
to bring up the menu screen. If a button is not pressed before
the configured Entry Timeout expires, the unit will return to
Standby mode and the display will turn off.
• While navigating the menu screen, the current or
active menu item will be highlighted.
• Menu screen navigation is done using the
buttons.
• The Menu/Select button
is used as a select while navigating the
main menu and sub-menus.
• The device version and serial number are reported in the lower left
corner of the Setup Main Menu screen.
Viewing Current Configuration
Press the
button to access the Setup Main menu screen, then navigate to highlight
the Serial# and Version section. Press the
button to view the current device
configuration settings. Change screens by pressing the
or
buttons. These settings
are not editable from the device and can only be changed in the VuVault
®
settings.
Logging into the DVM
DVM login options are configured by your VuVault system administrator. When the
login is configured for Username or User ID, the appropriate Login screen will be
displayed after the unit has finished powering on.
OR
When Login is required, the password entry screen will be
displayed after the Username or User ID has been entered.
This is the same password you will use to log into VuVault
®
.
Navigate to your selection using the
buttons,
pressing the
button to enter each digit, then use the
checkmark button to continue.
