- 10 -
LED INDICATORS
The four LEDs marked Active, Link, Monitor/Open and Talk can provide the
following diagnostic information:
Operational Mode
Active
Link
Monitor/
Open
Talk
Normal operational mode. TalkMaster
is active. Intercom can communicate.
ON
ON
-
-
LAN connection is inactive. The RJ45
may be unplugged, or the cable may
be defective.
FLASH
OFF
-
-
Intercom has not been configured yet
or has been configured for DHCP, but
no DHCP Server is available. To turn
off DHCP, power cycle the Intercom
while holding down the + and - buttons
(Volume up and Volume down)
FLASH
ON
-
ON
TalkMaster™ Server software is not
running or not set to communicate.
FLASH
ON
-
-
TalkMaster software at the server has
"Searched" for intercoms in the
Configuration Mode utility setup
FAST
FLASH
ON
-
-
Receiving audio. The server software
(TalkMaster™) / PC microphone is on.
ON
ON
-
FLASH
Sending audio. Talk button is pressed
or server has engaged "listen" mode.
ON
ON
-
ON
Intercom is in "Server" mode, waiting
for a client to request connection
(Active LED flash alternates 1sec fast - 1sec slow)
DUAL
FLASH
-
-
-
Local "Monitor" button has been
depressed. Microphone is set to
constant "Talk" mode for monitoring
ON
ON
ON
ON
